Some WEM3080(202305 - 202403) require an upgrade to resolve a software bug.

  • Affected product: WEM3080 (Only the single-phase meter WEM3080 is affected, other products are not affected)

  • Production range: May 2023 - February 2024

  • SN (Serial Number) Query: You can check here to see if your meter is among the problematic devices (need to log in the IAMMETER-cloud first)

  • Problem Description: Due to a bug in the metering firmware of our metering module, WEM3080 produced during this period exhibit a bug where kWh measurements become inaccurate once they exceed 1000 kWh.

  • Solution: Upgrade to the Wi-Fi firmware  , which will then internally upgrade the metering firmware to the latest version. This will resolve the issue.

IAMMETER has been in production since 2018, and this is the first time such a problem has occurred. Although we have exerted every effort to ensure product quality, we regret that we were unable to avoid this issue.

We deeply apologize for the inconvenience caused to all affected customers.

As compensation, we are willing to provide a certain amount of coupons to all affected customers.

Thank you all for your continued support. The development of IAMMETER could not have been achieved without the enthusiastic help and support of our customers. Thank you.

Bug fix version: i.75.98.72U5.bin

Thread Status
11
1168
5
6
4

Sort replies by:

1. Locate the ip address of the meter, you can use any network discovery app such as fing etc.

2 Type the ip address in a browser while ensuring you're connected to the same network as the meter is.

3. If you only see the "basic" and "monitor" tabs in the meter page, then type "system.html" after the ip address. 192.168.5.5/system.html (example).

4. You can now see another tab which has the option to upgrade the firmware.

5. If you cant locate the ip address of the meter, simply switch off the router or AP the meter is connected to and then search for wifi networks and you will see a wifi network resembling iammeter, connect to it, use admin/admin as user pass and do as described in #4. (Disconnecting the meter from the router enables it to broadcast its own name in AP mode.

I use 3 phase meters, hopefully the process will be the same.

Hi,

My meter is marked as affected device.

what is te procedure to update the firmware? Thx


Please download the FW  in the red rectangle

What is the upgrade procedure once the .bin file has been downloaded ?

please be more specific. i already downloaded the file. whats next? how to install .bin file !!?

Please download the FW  in the red rectangle

*If you choose to switch off the router to enable the meter to broadcast its own wifi AP to which you can comnect, ensure you are close to the meter as its broadcast range is limited unlike home routers.

Thanks Usman, i hope it worked 😀 

1. Locate the ip address of the meter, you can use any network discovery app such as fing etc.2 Type the ip address in a browser while ensuring you're connected to the same network as the meter is.3. If you only see the "basic" and "monitor" tabs in the meter page, then type "system.html" after the ip address. 192.168.5.5/system.html (example).4. You can now see another tab which has the option to upgrade the firmware.5. If you cant locate the ip address of the meter, simply switch off the route

So appreciate your help.

Thanks Usman Hayat👍

1. Locate the ip address of the meter, you can use any network discovery app such as fing etc.2 Type the ip address in a browser while ensuring you're connected to the same network as the meter is.3. If you only see the "basic" and "monitor" tabs in the meter page, then type "system.html" after the ip address. 192.168.5.5/system.html (example).4. You can now see another tab which has the option to upgrade the firmware.5. If you cant locate the ip address of the meter, simply switch off the route

To help other out so as to not waste your day as I have.... My 3080T refused to update its firmware until I factory defaulted it and connected to 11.11.11.1... It would upload the file and respond with OTA success but the revision would not change. 

And emailing support was no help.... I was told to search this forum.....

Apologies for missing your previous replies.

Could you please create a new topic in our forum and describe your issue in as much detail as possible? Here’s what we need to know:

  1. What exactly is the behavior of the WEM3080T when it "refuses the upgrade"?

    • For example, does it upload the file and show "OTA success" but the firmware revision doesn’t change?
  2. What was the firmware version prior to the upgrade attempt?

  3. How are you determining that the OTA update was successful?

Please attempt the upgrade again and provide step-by-step snapshots of your process in the new forum topic.

And emailing support was no help.... I was told to search this forum.....
Looks like you are new here. Register for free, learn and contribute.