Analyze the kilowatt-hours (kWh) in selected 30 minute blocks (Per day/month )

This analysis is already available -

Analyze the kilowatt-hours (kWh) in selected hours (Per day/month )


My power provide calculates Demand tariff by measuring the peak kWh consumption in any 30 minute block of the selected hours  over a calendar month.

This could be achived by changing the daily HOUR blocks to daily 1/2 hour blocks in the Energy consumption during selected hours report analysis.

A bonus feature would be to highlight the HIGHEST kWh usage in any month for the selected daily 1/2 hour blocks.



I installed my WEM3080T just 2 days ago, and I am very impressed with the features and customer support.


John

Thread Status
5
34
3
1
0

Sort replies by:

Hi:

Let me explain more about Wilson`s question.

We have already supported the demand tariff in our system, like this https://imeter.club/topic/194

it means you can get the maximum power reading of each 15min/30min/60min.

Do you think that still need to get the kWh per half an hour?

OK, we will discuss this and reply to you soon.

Hi,

It is not possible to set 30 minutes in the report you screenshot. 

Can you provide more details on the requirements? Maybe we can consider adding corresponding reports to match your needs. 

It is best to use excel or pictures to illustrate the detailed query conditions and expected results.

This analysis is already available -Analyze the kilowatt-hours (kWh) in selected hours (Per day/month )My power provide calculates Demand tariff by measuring the peak kWh consumption in any 30 minute block of the selected hours  over a calendar month.This could be achived by changing the daily HOUR blocks to daily 1/2 hour blocks in the Energy consumption during selected hours report analysis.A bonus feature would be to highlight the HIGHEST kWh usage in any month for the selected dail

I was looking in the wrong place.


Thank you for that answer Laolui    It fulfills my request.


I only installed the meter on 2 January 2023.  When I selected the month of January 2023 for Demand charges analysis, it showed no data.  I saw my demand data once I selected the month of December 2022.


My question - Is the month in that report for the billing month as configured in settings, or is it for the last 30/31 days?


Hi:Let me explain more about Wilson`s question.We have already supported the demand tariff in our system, like this https://imeter.club/topic/194it means you can get the maximum power reading of each 15min/30min/60min.Do you think that still need to get the kWh per half an hour?

Hi 

Yes, you can set the bill date like this https://www.iammeter.com/docs/set-billing-date

For example, if you set the 7th as the bill date, then from Dec 7th -Jan 7th will be counted as the bill cycle of December.

I was looking in the wrong place.Thank you for that answer Laolui    It fulfills my request.I only installed the meter on 2 January 2023.  When I selected the month of January 2023 for Demand charges analysis, it showed no data.  I saw my demand data once I selected the month of December 2022.My question - Is the month in that report for the billing month as configured in settings, or is it for the last 30/31 days?
Looks like you are new here. Register for free, learn and contribute.