Incorrect value in table on Wiki Page about Net Metering Mode?

Hello,

I have read the Wiki Page about Net Metering Mode

https://de.iammeter.com/docs/net-energy-meter

and I think there is a mistake in the calculation table?

In the text there is written that:
P1 = 2KW (coming from Grid)
P2 = 1KW (coming from Grid)
P3 = -3KW (pushing to Grid)

The table below says then:

Net Meter Mode 0 --- 0 --- 0 --- 0 --- 0
this is correct. Taking 3KW from Grid and pushing 3KW to grid equals to 0 if the calculation is done with net meter mode.

Normal Mode 3 --- 0,9 --- 1 (3?) --- 0,1 (0,3)? --- -0.8 (-0.6?)
Shouldn't the middle column be 3?

P3 is pushing -3KW to the grid, thus the column named "exported energy" should be 3? Also, then the calculated earning should be 0.3 and the balance should be only -0.6, right?

Picture: https://imgur.com/a/gyDKVNl


If not, then I don't understand where the 1KW exported Energy is coming from 😕


Kind regards

Thread Status
2
152
2
2
1

Sort replies by:

😕

Sorry, it is indeed a mistake.
I do not know why there is such an obvious mistake in this important description.
I have just corrected it.
Thanks for your reminder.

Hello,I have read the Wiki Page about Net Metering Modehttps://de.iammeter.com/docs/net-energy-meterand I think there is a mistake in the calculation table?In the text there is written that:P1 = 2KW (coming from Grid)P2 = 1KW (coming from Grid) P3 = -3KW (pushing to Grid)The table below says then:Net Meter Mode  0 --- 0 --- 0 --- 0 --- 0 this is correct. Taking 3KW from Grid and pushing 3KW to grid equals to 0 if the calculation is done with net meter mode.Normal Mode 3 --- 0,9 --- 1 (3?) --- 0
Looks like you are new here. Register for free, learn and contribute.