I was just looking over my income now that I finally have an energy provider that does not have dynamic pricing.

I set up the tariffs, changed my billing date and recalculated

I am using IAM-Meter Link to track all my energy with battery and DC/DC Charger both of which I do not have clamps. 

As a side note - Using IAM-Meter link it would also be nice to see what sources it is configured and be able to modify them if required.


As you can see below there is no import from the grid, and no large spikes through out this day for load




However on my billing page for this this is not the case, with some random bogus grid reading of 8kWh, which is now going to stuff up all my billing reports for the rest of the month, well actually for all time when reporting against this new energy provider. Can this be fixed up?


Thread Status
1
10
2
0
0

Sort replies by:

Hi,

Thank you for your detailed feedback.

From your screenshots, the unexpected Grid Consumption of approximately 8 kWh appears to occur on November 16, 2026, around 11:00 AM.

To help us identify the cause, could you please check the historical Grid Consumption data for that period?

1.Table View: Compare the cumulative Grid Consumption values at 11:00 AM and 12:00 PM. Is the difference approximately 8 kWh?

2.Graph View: Check the Grid Consumption curve for November 16. Is there a sudden jump around 11:00 AM?

3.Home Assistant: If you notice a jump, please check whether it matches the data from the corresponding source in Home Assistant.

If there is a sudden increase, please also let us know whether it reflects your actual energy usage or appears to be an unexpected data spike.

This will help us determine whether the issue originates from the source data or the billing calculation.

Thank you for your help!

Best regards,
IAMMETER Support

Looks like you are new here. Register for free, learn and contribute.