I have integrated my WEM3080T to Home Assistant MQTT using the latest firmware and Run Mode: MQTT. However, my meter becomes unavailable in HA MQQT every now and then.

To make it work again, I have to go to my meter web page, then go to setting and only click on Save. This seem to reset the run mode of the meter and it becomes available again in HA MQTT.

I just realised that the meter becomes every time I restart HA. I then have to go to meter web page and click on save again under settings.

Can you provide relevant screenshots of the problem that sometimes cannot be used? In addition, your upload interval is not set to 60. If so, please try changing it to 10.

This information you provided is very useful. I just restarted my homeassistant and found a similar problem. I will report it to my colleagues to see how to solve this problem.

Thanks for following up on this. Any idea when can we expect a solution for this bug.

miwyf

This information you provided is very useful. I just restarted my homeassistant and found a similar problem. I will report it to my colleagues to see how to solve this problem.

please try the version here 

https://imeter.club/topic/687

i.76.056 seems to be working fine

Thanks 

laoliu

please try the version here https://imeter.club/topic/687