Reset the kilowatt-hours (kWh) of the Energy meter by a modbus/rtu command

For safety concerns, we do not provide an easy way to reset the kwh of the wifi energy meter.
(Another important reason is even if you add an energy meter with none zero kWh into IAMMETER, it will also work properly, not affect any analysis)
Considering some customers need to reset the kWh for some reason, we open the method in public here.

If you want to reset the kWh of the energy meter,you need to wire the RS485(9600/8/n/1) and send the corresponding command to it

For WEM3080(single phase energy meter) , this command will reset both forward and reverse kwh.

01 10 00 0C 00 02 04 00 00 00 00 F3 FA (reset both forward and reverse kwh in 3080)

For WEM3080T(three phase energy meter), the forward and reverse kwh need to be reset by two commands

01 10 00 63 00 02 04 00 00 00 00 B5 92 (reset the forward kwh in 3080T

01 10 00 66 00 02 04 00 00 00 00 75 AD (reset the reverse kwh in 3080T

Thread Status

Sort replies by:

How to send the corresponding command to the meter?

You should wire the RS485 firstly and use a serial communication software in PC to send this command to the device.

How to send the corresponding command to the meter?


No recommend one, any software that can send the serial hex code would be OK

Is there recommended software
Looks like you are new here. Register for free, learn and contribute.