New User - 3-phase Install with 2x Solar Feeds - Install Help
Hi
I have a 3-phase unit on order, I have a 3-phase ( Australia ) Board and 2 x Solar Installations.
Question is, how can I monitor both Solar Installations and the 3-phase with 3 CT Clamps ?
I wanted to report on;
* Solar Generation - ( either each Solar Separate or Together )
* Power demand / being used
* Power being drawn from Grid
* Solar being Exported
Hi:
Please confirm such issues below
I have a 3-phase ( Australia ) Board and 2 x Solar Installations
it means your grid is 3 phase system, yes?
what is the phase of the "2*solar installation "?
Both 3 phase or single-phase + three-phase or both single-phase?
3-Phase Grid
Then I have a 3-phase Solar System and a Single Phase Solar System also installed ? not sure why..
I have the wem3080t and can see the diagram for the install to single phase, however wanted to now if possible on my installation to monitor solar also.
The Solar Systems installed are using a Solis inverter ( 3-phase (( App is Solis Home )) ) and a Growatt ( Single Phase App is ShinePhone )
Thanks for your Help
Hi,
let me confirm your situation.
grid: 3 phase
solar inverter: 3 phase + 1 phase
Is it correct?
If so, you can monitor all of them in IAMMETER.
You need two 3 phase energy monitor (WEM3080T),and one single-phase energy meter (WEM3080), please note, all the meter should be added in the same "place" in IAMMETER system
install a WEM3080T(3 phase energy meter) in the grid side, select the meter type to "grid" in the IAMMETER system
install a WEM3080T(3 phase energy meter) in the 3 phase inverter side, select the meter type to "inverter" in the IAMMETER system
install a WEM3080 (single phase energy meter) in the single phase inverter side, select the meter type to "inverter" in the IAMMETER system